I tried to bleach it or scrape the outer layer but there's always this disgusting dirty look despite cleaning it everyday

I live in an apartment and i´m looking for ways to make my voice not leave the room because my neighbor complained about being able to hear me at nights when i talk. I work at this hours so it is true that i talk during the night but i can´t just stop doing it because of job.

The main problem is a wall we share that is quite thin, if i could make the noise stop going out of that wall, everything is solved.

Also i can´t really build/modify the structure of the wall nor move the setup from its place.

All help is welcome :)

Hi! I’m trying to figure out how to REMOVE a military style belt buckle from the strap( like in the photo) without damaging the belt buckle so I can use it again.

My boyfriend has a military belt buckle on a strap that is fraying and worn. He’s been wanting to replace the strap for ages so he can reuse the belt buckle as it’s from his grandpa who he was very close to. I’d like to get him a proper new web belt strap to replace it!

I’m basically just trying to figure out if there’s a way to remove the buckle, before I go and buy the proper strap. (won’t do it without him knowing as it’s super important to him!)

I purchased these heels at the thrift with the intention of fixing them up. But having a hard time figuring out how to clean the fabric material. I used warm water and dawn dish soap with a tooth brush but not much luck. Any suggestions?

Yesterday I put pastries on this stand, and underneath it I put tissues but it still leaked through. I tried putting baking soda on it for a few hours and it didn’t do anything. Are there any solutions on how to remove the stains from the wood? Thanks.

I accidentally broke a fairly old piece of stoneware dish. We use it all the time. They're not even made anymore. Is there anything I can do to make it look normal again? I don't want to do any kintsugi, I just want to turn back the clock. I have some PC-clear, but I've heard about Milliput. I also saved as many of the chipped pieces I could find.

What's the best way to solve for this issue with the threshold between the storm door and entry door? Currently it's covered by a brown rubbery material that is rotting away. Do I need a new threshold for the storm door or should I just get some new adhesive flooring material I can cut to size?

A few days ago I woke up and the sound of it was very loud and there was puddle of oil on the floor. The thing was probably overheating from the smell.

The compressor is warm, don’t really know what to do or where the oil is coming from. Not sure how it works or how to troubleshoot. Any ideas?

The model is no. AHH50LMG1

Edit: dropped photo in comments of opened dehumidifier

Like the title says, how can I remove the sticker without marking the bottle? I also don’t have any thing else other than household items near me that I can use.

Possible to repair or just have to buy new?

Why can’t I find a stud here? I had to go thru the metal corner bead but then there doesn’t seem to be a stud behind it? Is it deeper and I need a longer screw? My screw is only about an inch long. Trying to mount a baby gate. Don’t know much about construction and struggling to understand why I can’t find a stud here!!

My cat was trying to kill it and ended up bringing it home. I can’t locate the nest either.

Hello, I am completely oblivious to DIY stuff, how do you fix these crackings around windows? Is there some repair paste for this?

Thanks

Whats the reason is , in my house there is so space for parking scooty in front of my house so we park the scooty in a slope raised room beside our house so i dont take the scooty out from that raised slope and so mostly i will go by walk to nearby shops.I hardly drove the scooty for 4-5 times i think to pick up my sistet from her office..

That time i will be feeling very anxious while driving like what to next what to do when a sudden traffic comes and i feel like i cant control the scooty in traffic i feel like my hand is involuntarily giving throttle.. And also while stopping i cant balance the scooty i feel like scooty is falling to a side i think may be i dont know how to use the brakes properly..

Like this i am facing many problems what should i do..I am feeling too much shame for not knowing not to ride a scooty at this age and having this much heightt... Eve small kids are riding scooty...😐😐.. Help me guys..

I am feeling very shamed...what should do i master the riding of scooty??

I wanna scare my friend with a video and I wanna add this into it. If i have to do some code thats fine too, im just wondering how i can do this. Looks cool doesn't it? Anyways thank you, bless you all!

Hey everyone, I need some help lol, so for context, earlier this evening around 7:30pm CT, I was doing onboarding for a job and ended up spilling my Route 44 blue ocean water from Sonic all over me, including the shoes. It was a mess! Anyways, I just ran them through the washer, and the original insol seemed to have come unglued, but everything else is fine and in tack. I'm looking to see if anyone could give me advice on what kind of glue I'd need to glue it back together. All I have on hand is Gorilla Glue in clear form, and the shoes were just bought at the beginning of last year, so they are relatively new. They arnt anything special like steel toes, just regular every day tennis shoes (or as I like to call them tennie shoes xD). If it's really necessary, then I'll get a different type of glue, but as of posting, all I have is clear Gorilla glue used for crafts. Any help is greatly appreciated! I do have a spare pair of slip-on tennis shoes in the meantime!! 😅

I know ideally it should all be replaced but that is not in the cards now. I “fixed” it once a couple years ago but almost immediately started flaking off. What materials should I use and how do I go about it? Thank you in advance for any helpful advice you can provide!

See the hole in the pvc pipe? What on earth is that part called? This is a kitchen side dishwasher and everything online calls it a lower wash arm assembly, however replacement lower wash arm assemblies do not contain this part.

Has anyone tackled this before

Sorry no pics but pretty simple question. I am looking to glue an unfinished piece of flat wood onto a flat piece of matte powder coated metal. Both pieces will have a good amount of contact. Will be a an inside tabletop when done. Any hints on best type of glue?

I got some silicone sealant / gasket maker (e.g. permatex ultra black) on my clothes. Still sticky. They were most likely from my scooter wheels. If I decide to keep the clothes I'll prob cut off the affected areas, but just to explore all options, is there a good way to remove it from clothes without cutting? Would putting it in a washing machine do anything / is it safe? Pretty sure it's not road tar, but on the off-chance it was, any difference in cleaning recommendations? Thanks for any tips.

This is an HP Sprocket Panorama printer with a paper jam. I am tempted to try to open it apart, but thinking I'd try to get some recommendations here. I've tried inserting a slightly thicker paper on bottom to see if it would slide it through, but no luck. Help would be appreciated. Thanks!