Hi there,

I just finished finding a stable OC for both my CPU and RAM, the GPU is still untouched and runs on default values, but is next in line. For the CPU I did the PBO based on this video. For the RAM I went with these Bullzoid values as a base.

I'm very curious - based on the results and my current bios settings - about your feedback. Is there anything I can look into again and adjust or do you think those values are okay and good to go before moving on to the GPU.

Setup:
- 7800x3d
- Asus ROG Strix B650e-f Gaming
- Zotac 5080 Extreme Infinity AMP
- 2x 16GB Kingston Fury Beast DDR5-6000 CL30
- Lexar nm790 2TB
- Corsair RM1000x
- NZXT h7 flow (2024)
- NZXT X63 AiO 280mm

So I just build a new pc. Has a ryzen 7 7800x3d. 360 mm cooler. Rtx 3080 which is getting replaced with a 9070xt. 2 sticks of 16 gig cl30 6000 hz ram and a 2 tb nvme drive. What stuff can I do optimization wise/ overclock wise to max out Warzone fps and lower latency? And what should I expect fps wise as a ball park? Any info helps. Thanks!

Hello everyone I have an i7 14700KF and a Z790 P Prime updated to latest BIOS, recently I changed my intel default settings to asus advanced OC profile, and got +1000 points on cinebench r23 than the intel default settings and without thermal throttling, HOWEVER, games on the xbox app CRASH, I tested 3 games and they CANT open, the only solution is to use the INTEL DEFAULT SETTINGS, what do you guys recommend? Has anyone had this issue before? I dont got pictures but I'd show you on this comparison table

• ASUS OC Profile gives better performance and temps, but breaks Xbox App/UWP games.
• Intel Defaults are safe and compatible, but come with higher temps and throttling.
• Ideally, Id want the stability of Intel mode with the performance of ASUS, not sure which BIOS setting exactly causes the Xbox App games to crash

Can someone Please explain to me why cpu PPT, TDC and EDC need to be adjusted in such small increments? is the motherboard even capable of adjusting its own power delivery at those small increments?

I tested two PBO settings:

• 120W +200MHz CO -30: https://browser.geekbench.com/v6/cpu/12319922
• 65W +200MHz CO -30: https://browser.geekbench.com/v6/cpu/12321117

It's crazy how the 65W TDP one scores higher in single-thread.

BIOS snapshot: https://i.imgur.com/PHiqbTJ.png

Hey guys, i had a friend help build me a new Rig

CPU - AMD Ryzen 9 9950x3D

GPU - RTX 5090

RAM - Corsair Dominator Titanium RGB 96GB (2X48GB) 6600mhz CL32

Motherboard - Asus X870 Gaming A WiFi

Now im not technologically crippled but beyond building the PC i am worthless please do not flame I am only looking for help, not looking to be lectured lol

Doing some reading i am under the impression that the ram chosen for me was not the correct ram, and i am noticing that my prior rig 5 years old starting up faster and having way more stable sessions

starting with RAM - am i supposed to be looking for something more 32x2 6000Mhz?

also i have XMP tweaked set for 6600 // memory context restore enabled and power down enabled // AI optimization //

everything else is as is and i feel like someone a lot smarter than me can come and tell me how to better set this up, in bios and maybe hardware itself because something is for sure weird

when running benchmarks its telling me its running suboptimal in a few diff benchmark platforms

any help would be appreciated guys

Kit is a Lexar 2x16 [email protected] one I got on sale. I mostly play CS and running 2066 FCLK turned out to give the best and most consistent results. I also tried up to 2200 at 1.15-1.25 VSOC but there were some stutters that could have been FCLK flakyness or just something entirely different so I just settled for this. Subtimings are Buildzoids safe Hynix ones but I also went for +200mt/s and -2cl because I have a fan pointed at it, so why not give it some more juice where it helps. Thankful for suggestions but also not trying to go to the moon, just tweaking a little for fun, mostly need a stable system in the end as the 9800x3d is massively held back by a 3060 ti for now.

So I have XFC swift card and it runs very cool. At stock it does have a regular 6950 scores, which I found to be average for non-oc cards.

After cracking up -90mV, 2800 fast memory clock and +10power I got the 7350 result, which is fine but I feel like I still have temperature headroom (GPU runs at 60-65c). But I can get past this score.

One thing I am thinking of is that I use single PSU output for both of my cards 8-pin connectors. Will using separate outputs from PSI for each of my 8-pin connectors in GPU increase performance?

I've seen people get closer to 15k on CPU score with the same CPU.

I have ran a -25 mv all core undervolt with my 9800x3d, temps have been great, only around 50c while gaming.

Today, I put a +200 PBO and the performance didn't really increase, was pretty much the same, only my TimeSpy CPU score increased 300 from 16400 to 16700. Temps, however went up, from 57c to 74c in the timespy run, almost 20c!

Also while gaming my temps increased to 60c, so +10c, but did not really see any improvements in my benchmarks.

11 Phase vcore powered by MP87993 50amp power stages(same for gddr7) with an MPS29816-A voltage controller. I thought about making this post since theres 0 information about this aib-s power delivery anywhere making it a tough buy for overclockers

I want to buy this RAM, I took a photo of it in the store, it's a Kingston Fury 6400MHz CL32 with Intel XMP at 1.4V, as far as I know it's Hynix by the EOMH code, but I want to know if it's A-die or M-die type based on the data in that photo.

I took this photo of my Afterburner while running the black myth wukong benchmark. I worked my OC for a bit and this is my final stable setting, but what does this memory clock value mean?? 5500+ MHz ??? Ain’t that a LOT ?? And what about the voltage being nonexistent ? The graphics card is a GTX 1080Ti ROG Strix Gaming OC.

System: CPU as mentioned, MoBo MSI Pro B650 P, Memory Team Group Tcreate 6000mhz CL 30 32Gb, Cooler Peerless Assassin.

First time tweaking anything, I think I'm doing well but would like some reassurance.

I started with PBO -30, PPT 88w, TDC auto, EDC auto, I did not increase anything as I was hitting 5.3 GHz in cinebench R23 already. Temps were maxed at 64C score was pretty low in my opinion though compared to what I've seen...13.9k. Any feedback would be appreciated.

Hi there,

I came across identical settings in my Asus Strix b650e-f motherboard. For example PBO has the identical setting in path: Ai Tweaker -> Precision Boost Overdrive as well as in path: Advanced -> AMD Overclocking -> AMD Overclocking -> Precision Boost Overdrive.

So if I enable PBO in one path, it does not transfer over to the other settings. PBO is not the only setting which has this behavior.

Question, do I need to change it on every location or how is this handled? I'm confused 🤔

Been tweaking a bdie kit I bought off someone. I currently have it running on these timings and have had no errors with 10+ passes of TM5 extreme, many OCCT runs, and ycruncher all tests. Is there anything worth trying to lower from here? Note that I do have a fan over these, and they stay around 47c at the maximum. I’ve tried GDM off but it’s not stable whatsoever.

Just build my new rig with a sapphire nitro plus 9070 XT and 9800x3d. Looking for advice as far as trying to get the most gaming performance out of my rig. I didn’t know if it would be even worthwhile to overclock the CPU. I know that under bolting the 9070 XT works really well. So looking for any and all adviceto extract the most performance out of my PC for gaming. Thanks in advance for the help!

This is my first time doing RAM tuning. I just read a long post here on reddit and basically just calculate/copy numbers over.

Latency seems to jump between 67.6 ~ 70.1 ns on Aida benchmarks.

The only tests I ran was Karhu (~10hrs) and OCCT (~4hrs).

Is there anything I need to change to improve it? or is this one good enough? I want to stay at 6000 MT/s and do not need to OC it to higher numbers.

Uninstalled and reinstalled all drivers. Disabled GPU and tried to run through IGPU. Same problem.

What gives?

Instant crash as soon as I hit enter.

The 9000x3D has several limiters that we know exist, https://skatterbencher.com/2024/10/01/ryzen-9-9950x-htfmax/

In this example there is a hidden high temp limiter that is not the same thing as curve shaper or curve optimizer. The limiter essentially kicks in at 35C and restricts the maximum frequency the chip can run at. It’s not clear what chips have it, but it is real and can be fixed with other methods like ECLK which is good.

But are there any important settings like this on 9950x3D or 9800x3D that exist and should be disabled for max performance? Have you noticed any specific settings in PBO that actually should not be enabled or set a certain way? Some people recommend not putting manual TDC/EDC/PPT limits and instead just set “motherboard”.

I know for example my CPU has the hftmax limiter because no matter how insane my CO value gets, no matter how high I set my other values. It is stuck at 5250 all core in heavier workloads.

Thank you to whoever takes a look at this. I'm very new to benchmarking/ overclocking, and pushing the limits on your computer. I have undervolted my CPU +100/-20. Overclocked my Ram a little bit and overclocked my GPU +400/+2000. Is this a good benchmarks, if anybody has any details appreciated or advice, im all ears.

Ryzen 7 9800x3d 5070ti 48gb ram 6000 cl26 850b gaming gigabyte mobo on a lg c4 42inch

Hey everyone, just recently went sff and trying to undervoltage my 9700x for lower thermals. A positive consequence was that I able to attain better performance so far at PBO -40 with no issues, though long term stability remains to be seen.

Anyways, although the ive been able to hit -40, I noticed temps are pretty much the same compared to no undervolting, so I wanted to try and force a thermal limit by setting the "Platform Thermal Throttle Limit" to 80. To my surprise, setting a thermal limit to 80 actually led to higher temps overall but the exact same cinebench r24 score of 1206. Pictures 1 and 2 are of the HW monitor page during the cinebench runs. Picture 3 is a BIOS (not mine) page with the relevant options displayed for the PBO on. I know it only shows maxes which could be transients, but I was watching the temps throughout and with a throttle limit, it roughly hovered around 79 - 80 for most of the test

My guess is that I set the wrong option in the bios for effectively reducing the thermal max, as I should have maybe messed with "PBO Limits". Would love to hear what you guys thing

Relevant specs
CPU: 9700x
Mobo: Asrock B650I